Axial Fans

Axial Flow Fan Manufacturer

Axial flow fans are a type of industrial fan used to dissipate heat from overworked machinery and other equipment. According to their name, axial flow fans are a specific sort of compressor that generate airflow in a direction perpendicular to the device's axis. Impellers in these fans take in air and push it out in a direction perpendicular to the fan's axis of revolution.

Axial flow fans can use either alternating current (AC) or direct current (DC). It is possible to design it in a range of diverse ways, depending on the requirements, for example with a duct or a mounting ring, and so forth. As a result, there are a plethora of pre-made templates from Axial Flow Fan Suppliers in UP, Delhi, India from which to choose, and each of these can be tailored to the specifics of the device and setup in question.

Components of an Axial Flow Fan

The most basic part of every axial flow fan is the motor. In addition, it is built with ball bearings, blades, and an impeller. The fan's housing or enclosure shields it from the elements and prevents issues like spillage, shock, and vibration. The enclosure is built of metal, specifically steel, aluminium, or alloys of the two.

Can You Explain How an Axial-Flow Fan Operates?

Like the air-foil form of an aeroplane wing, which creates lift, the operation of axial fans is similar. The air above and below the wing are split and travel at different speeds due to the air-foil shape of the wing. The configuration of the wing is to blame for this. This is because air travels farther in the upper levels compared to the lower levels. Compared to lower altitudes, the upper atmosphere has a much greater dynamic force due to the high air velocity. Air underneath, on the other hand, moves slowly and generates a lot of static pressure. In this case, the citation is required.

BK Air Systems is the Axial Flow Fan manufacturer and suppliers in Delhi, India that provide various types of wind ventilators that are designed to exhaust all the industrial pollution including smoke, gases, humidity, fumes, heat, dust, and other irritants from the factory, industrial unit or other covered areas. At the same time, these Axial Flow Fans provide a safe, healthy and cool environment within the area and promote fresh air inside. These Axial Flow Fans do not require electricity to operate, as they run using the natural wind energy for 24 hours a day throughout the year. These ventilators can be easily installed on various buildings such as warehouse, workshops, factories, garages, kitchen, etc. to maintain the temperature and ward off pollutants as well as heat.

BK AIR Axial Flow Fan are used for providing general ventilation, fume exhaust, Dry D.G. room ventilation, supplying ambient air and removal of hot spots and can be as roof extractor and bifurcated fan. Axial Fans Axial Fans use a propeller to draw the air into the fan and discharge it in the same direction. BKAIR Axial Flow - Fans are specially manufactured for all applications and mounting positions. These fans are available with two type of arrangements- Direct drive arrange.- Impeller is directly mounted on motor shaft and V-Belt drive arrange.- impeller is mounted on EN-8 shaft coupled with bearings.

BK AIR-impellers, hubs and blades are made of aluminum alloy, the aero dynamical profile guarantees high efficiency and low noise. The impellers are available with fix blades as well as adjustable blades in aluminum and also in PPG with adjustable blades & pitch angle to optimize the duty point.

IMPELLER

BK AIR-impellers, hubs and blades are made of aluminum alloy, the aero dynamical profile guarantees high efficiency and low noise. The impellers are available with fix blades as well as adjustable blades in aluminum and also in PPG with adjustable blades & pitch angle to optimize the duty point.

The available sizes are from dia. 300 to 1600 mm diameter.
Capacity from - 1000 to 150000 m³/h
static pressure up to 150 mmWG.

Salient Features :

  • Low Maintenance
  • Low noise level
  • Low Power Consumption
  • Large Air Volumes
  • Vibration Free
  • Cost Effective
  • Available in four mounting arrangements

Axial Flow Fan is used for the customer’s requirement, as a Axial Flow Fans manufacturers and suppliers in UP, Delhi, India, we ensure that our products offer safety for the user and follow strict manufacturing standards. The use of Axial Flow Fans not only prevent the spreading of paint but also lowers the risk of spreading fire, pollution, etc. Easy to install and assemble, our spray painting booths are made from durable and strong material to withstand all weather conditions

The claims we make

So that everyone may do their best work and feel fulfilled in their careers, we, Axial Flow Fan Manufacturers in UP, Delhi, India, aim to create a working environment that encourages innovation, appreciation, tolerance, and fair treatment.

To ensure that every customer's experience with us is a pleasant and relaxing one, and to provide them with superior products and service that goes above and beyond their expectations. Our mission is to not just help local non-profits and individuals, but also to benefit our own employees and their families monetarily and professionally.