Mechanical Dust Collector

Mechanical Dust Collector

BK Air Systems is the Mechanical Dust Collector manufacturers and suppliers in Delhi, India, that provide various types of wind ventilators that are designed to exhaust all the industrial pollution including smoke, gases, humidity, fumes, heat, dust, and other irritants from the factory, industrial unit or other covered areas. Mechanical Dust Collectors are having low initial and operating cost and fairly high dust separation efficiency (85-90%) for coarse particles (10 microns and above) only. These also act as pre-separator for achieving fairly high efficiency for air/gas with high initial dust concentration with more efficient final collectors downstream.

Depending on volume of gas to be handled and required efficiency, these may be either single cyclone or group of cyclones or small diameter cyclone elements. The later are made of cast iron and fitted with inlet guide vanes. The dust particles are separated from air stream by centrifugal force. These are available in a wide variety of designs, dust collection efficiencies and materials of construction and can be installed in any combination of units to suit the application.

Mechanical dust collectors used extensively to separate large particles from a flue gas stream. Mechanical dust collectors are particulate control devices that use centrifugal force, gravity settling, and inertia to collect pollutants.

The offered equipment is helpful in improving the quality of air by collecting polluted air from industrial processes.

The offered collector is manufactured with the use of supreme quality components under the guidance of ingenious professionals. Additionally, our clients can purchase the provided Mechanical Dust Collector (MDC) at reasonable prices from us.

Mechanical Dust Collector Key Features

  • Custom Engineering To Meet Specific Applications
  • Coned Tops For Rain Run-Off
  • Fabricated From Carbon Steel, Aluminum, Stainless Steel And Ar Plate
  • Fully Welded Construction From 12 Gauge To 3/8” Plate On Some Model
  • Used In A Variety Of Industries
  • 12" Inspection Door Above Material Discharge

Our offered dust collectors are availed in variegated sizes and designs so as to meet the needs of our valuable clients. Moreover, clients can avail these dust collectors from us at market leading prices.

These are typically used for collecting coarse or large dusts produced in high dust loading applications, such as woodworking or machining, cyclone collectors are also used for product recovery of fine dusts, like powdered paint.